Use only if imprinted overwrap on bottle is intact. See your eye care professional annually. Tips for healthy lens wear. Rinse for lens-wearing comfort. When you insert your lenses. 1. Wash your hands with soap and water and dry with a lint-free towel prior to handling your lenses. 2. Prior to reapplying lenses, rinse each side of the lens for 5 seconds with fresh RevitaLens OcuTecÂ® solution to remove any debris on the lens. Rub, rinse & soak for effective disinfection when you remove your lenses. 1. Wash your hands with soap and water and dry with a lint-free towel prior to handling your lenses. 2. Place 3 or more drops of RevitaLens OcuTecÂ® solution on one side of the lens surface. 3. Rub your lens gently from the center to the edges for at least 2-4 seconds (never rub in a circular motion, because it may tear the lens and not clean the outer edge surface). 4. Turn the lens over and repeat steps 2 and 3. 5. Rinse each side of the lens for 5 seconds with fresh RevitaLens OcuTecÂ® solution. Place lenses in clean lens case and fill with RevitaLens OcuTecÂ® solution. Close lens case tightly. 6. Soak-Allow lenses to soak for a minimum of six (6) hours for disinfection, cleaning, and protein removal. Caring for your lens case. Always rinse your lens case daily with fresh RevitaLens OcuTecÂ® solution and let it air dry. Never use tap water. Never re-use solution. Replace your lens case every 1-3 months. Discard solution 90 days after opening.