Before Cleaning: Vacuum carpet thoroughly to remove loose dirt. Test a small, hidden area for colorfastness and examine when dry. If color is affected do not use. For upholstery, look for manufacturer's cleanability code tag. Use on fabrics coded WS or W. If coded X or S, do not use. Not recommended for use on velvet, silk, vinyl, or leather. Large Area Carpet Cleaning: 1. Shake can well. Hold can upside down about 2 feet above carpet. Spray foam evenly over a 3 foot square area. 2. Work the foam into carpet in two directions using a damp, colorfast mop. 3. Repeat steps 1 & 2 until the entire area is cleaned. 4. When dry, vacuum thoroughly to remove dried foam and loosened dirt. Self Cleaning: 1. Shake can well before and during use. Hold can upside down about 2 feet above carpet. Spray lightly and evenly using a side to side sweeping motion (the carpet color should show through). 2. Allow 15 minutes for the foam to loosen dirt and to dry. Drying time may vary with humidity and depth of carpet pile. 3. When dry, vacuum thoroughly to remove dried foam and loosened dirt. Upholstery Cleaning: 1. Blot wet soils with a clean absorbent cloth. 2. Shake can well and generously apply directly to stain from a distance of 4-6 inches. Allow foam to absorb into stain for 3 minutes. 3. Gently blot area with a clean, damp, colorfast sponge or cloth. Rub gently if required. Do not overset fabrics. Hint: To avoid rings, clean entire section where soil occurs. 4. Rinse sponge or cloth and repeat as necessary. Allow fabric to dry thoroughly before use.
Reckitt Benckiser Inc.
Parsippany, NJ 07054- 0224
Keep out of reach of children. Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120 degrees F. Avoid freezing.