Protect work area. Surfaces must be clean, dry and free of old caulk, grease, dust and other contaminants. Pierce tube with point at end of cap. Attach nozzle & cut to desired bead size. 1. As an Adhesive: Apply a continuous, even bead of silicone to one surface. Assemble parts immediately. Leave bond undisturbed for at least 2 hours. As a Sealant: Hold tube at angle. Apply by pushing silicone into joint. 2. Clean-Up: Uncured: mineral spirits. Cured: Carefully scrape excess with razor blade of sharp-edged too. Open Time: Tack Free Time: 45 minutes. Cure Time: 24 hours. Cure time dependent on temperature, humidity and thickness of product used. Cured Form: Transparent, non-flammable, flexible solid. Tensile Strength: 325 psi. Application Temp: Above: -35 degrees F (-37 degrees C) to 140 degrees F (60 degrees C). Withstands: Short Term: -50 degrees F (-46 degrees C) to 392 degrees F (200 degrees C); Long Term: -50 degrees F (-46 degrees C) to 350 degrees F (177 degrees C). Not Recommended for: Not paintable. Do not use on marble, limestone, brass, copper, magnesium, iron, zinc or galvanized metals. Hard to bond plastics such as PE, PP, PTFE, PMMA, PC, or PVC. Not suitable for below grade.
Rocky Hill, CT 06067
Prolonged or repeated contact with uncured adhesive may cause eye, skin and respiratory tract irritation. Repeated or prolong contact may cause allergic skin reaction. Read carefully cautions. Contains petroleum distillate, alkyl acetoxysilane and acetic acid. Acetic acid, which irritates eyes, skin, and respiratory tract, is released during curing. Avoid breathing vapors. Use with adequate ventilation. Do not get in eyes, or skin or on clothing. First Aid: In case of skin contact wipe off and wash with soap and water. In case of eye contact flush with water for 15 minutes, call a physician immediately. For respiratory difficulty, move to fresh air. If swallowed, do not induce vomiting. Call a physician immediately. Keep out of reach of children. Chemically Curing Sealant - VOC 3%.