1. Protect work area. Glue may damage fabrics and furniture finishes. 2. Unscrew protective cap. Hold upright and away from eyes and body. 3. Parts to be glued should be clean and dry. Parts must mate. Metals may have to be cleaned with a solvent or scraped. Dampen porous ceramics on one side and apply glue to dry side. 4. Gently squeeze a small drop of glue on one side of part. Apply one drop per square inch. Too much glue or spreading glue will make poor bond or no bond. 5. Join the parts and press for 30 seconds. Allow to set for a few minutes. 6. Replace cap. Screw on and lock into place. Not for use on foam, rear view mirrors, polyethylene, teflon or other fluorocarbons. Do not put bonded items in oven or on stove. Do not use to attach artificial nails. Store in cool, dark place.
Elmer's Products, Inc.
Columbus, OH 43215-3799
Eye and skin irritant. Bonds skin instantly. Contains ethyl cyanoacrylate. Avoid contact with skin and eyes. If eye or mouth contact occurs, hold eyelid or mouth open and rinse thoroughly but gently with water only for 15 minutes and get medication. Liquid glue will sting eye temporarily. Solidified glue may irritate eye like a grain of sand and should be treated by a eye doctor. If skin bonding occurs, soak in acetone base nail polish remover or warm soapy water and carefully peel or roll skin apart (do not pull). Contact through clothing may cause skin burn. If spilled on clothing, flush with cold water. Avoid prolonged breathing of vapors. Use with adequate ventilation. Keep out of reach of children.