Protect work area. Glue may damage fabrics and furniture finishes. Remove red, airtight cap. Never cut or pierce tip. Point tip of pen up and depress against hard surface. This equalizes pressure. Parts to be glued should be clean and dry. Parts must mate. Metals may have to be cleaned with a solvent or scraped. Dampen porous ceramics on one side and apply glue to dry side. Gently depress tip on one side of part. Drop size controlled by depressing tip partially or completely. Apply one drop per square inch. Join the parts and press for 30 seconds. Allow to set for a few minutes. Replace red, airtight cap. Store upright.
Elmer's Products, Inc.