All surfaces must be clean and tight fitting. Wear gloves to avoid skin contact. Gorilla Glue will stain skin and ruin clothes. 3 Easy Steps: 1. Damp it. Gorilla Glue is cured with moisture. Lightly dampen one surface with water. Do not add water to bottle. 2. Glue it. Spread a thin layer of Gorilla Glue on other surface. A little goes a long way. Do not over apply glue. 3. Clamp it. Clamp objects together for 1-2 hours. You can use heavy objects to achieve clamping pressure. Bond line improves with better clamping. Note: Do not over apply glue. A little goes a long way. While curing, glue will expand 3-4 times creating an incredibly strong bond line. Be careful of squeeze-out. Not recommended for use on polyethylene or polypropylene plastics. 3 Easy Steps: Damp it (Lightly dampen surface. Do not add water to bottle) to activate Gorilla Glue. Glue it. Expands, use sparingly. Clamp it for an incredibly strong bond. Storage: After each use, wipe nozzle with a dry cloth, and tightly replace lid. Store in a cool, dry place.
Cincinnati, OH 45227
Harmful or fatal if swallowed. Potential skin sensitizer. See warnings on back panel. Harmful or fatal if swallowed. Keep out of reach of children and animals. Do not microwave or heat. Do not leave in hot vehicle. May cause sensitization by inhalation and skin contact. Individuals with chronic asthmatic conditions should consult physician prior to using product. Contains 4, 4 inch - diphenylmethane diisocyanate (MDI). First Aid: Eye Contact: Flush thoroughly with water for at least 15 minutes and seek immediate medical attention. Skin Contact: Wash affected areas with a gritty textured soap and water. Inhalation: If inhalation causes physical discomfort move to fresh air. If breathing difficulty occurs or if product is swallowed seek medical attention.