To mount hook: 1. Clean surface. Use isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. 2. Apply strip. Remove red command adhesive liner. Align square end with raised line on back of hook. 3. Press firmly. Remove black wall side liner. Position hook and press firmly for 30 seconds. 4. Wait 1 hour. To remove hook and base: 1. Slide hook cover up. Reveal mounting base and removal tab. 2. Grab removal tab. To prevent base from snapping your fingers, hold base as shown. Do not press base against wall. 3. Slowly slide the tab straight down against the wall stretching the tape at least 15 inches (40cm) until mounting base releases from the wall. Hooks can be reused with 3M replacement strips with command adhesive.
P.O. Box 33053 St. Paul, MN 55133-3053