Follow instructions carefully! Save instructions for clean removal in the future. To Mount: 1. Clean surface with isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. 2. Separate strips. Remove red liner. Apply strip as shown. Press firmly. 3. Remove black liner. Mount hook and press entire hook firmly for 30 seconds. 4. Wait 1 hour. To Remove: 1. Slide hook cover up to reveal base and removal tab. 2. To prevent base from snapping your fingers, hold base as shown. Do not press base against wall. Grab tab. Never pull the strip out at an angle. Strip could break or damage the surface. 3. Slowly slide the tab straight down against the wall, stretching the strip at least 12 inches (30 cm) until base releases from the wall. Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could soften and lose adhesion above 105 degrees F (40 degrees C).
3M Construction & Home Improvement Markets Div.
3M Center, St. Paul, MN 55144-1000
Do not use on delicate or paper wallpaper. May not adhere well to some vinyl wallpapers. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Use only one hook per object hung.