Follow instructions carefully! Save instructions for clean removal in the future. To Mount: 1. Clean surface with isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. 2. Separate strips. Remove red liner. Apply strip. Press firmly. 3. Remove black liner. Mount clip and press entire clip firmly for 30 seconds. 4. Wait 1 hour. To Remove: 1. Grab removal tab. To prevent clip from snapping your fingers, hold clip. Never pull the strip out at an angle. Strip could break or damage the surface. 2. Slowly slide the tab flat against the wall, stretching the strip at least 6 inches (15 cm) until clip releases from the wall. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive should soften and lose adhesion above 105 degrees F (40 degrees C). Clips can be reused with Commands adhesive mini strips.
3M Construction & Home Improvement Markets Div.
St. Paul, MN 55144-1000
Do not use with delicate or paper wallpaper. May not adhere well to some vinyl wallpapers. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang objects over beds.