Important: Follow instructions carefully! Save instructions for clean removal in the future! To Mount Hook: 1. Clean Surface - Use isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners. 2. Apply 2 Strips - Separate strips. Remove red Command Adhesive liners. Align square end with raised line on back of hook. Press firmly. Repeat with second strip. 3. Press Firmly! Remove black wall side liners. Position hook and press entire hook firmly for 30 seconds. 4. Wait 1 hour before use. To Remove Hook and Base: 1. Slide Hook Cover Up - Reveal mounting base and removal tabs. 2. Grab First Removal Tab - To prevent base from snapping your fingers, hold base. Do not press base against wall. Never pull the strip out at an angle. Strip could break or damage the surface. 3. Slowly slide the tab straight down against the wall stretching the strip at least 15 inches until strip releases. Repeat for second tab until mounting base releases from wall. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could soften and lose adhesion above 105 degrees F (40 degrees C).
3M Construction & Home Improvement Markets Div.
Box 33053 St. Paul, MN 55133-3053
Do not use with delicate or paper wallpaper. May not adhere well to some vinyl wallpapers. Do not use for antiques, heirlooms, or other valuable or irreplaceable items. Do not hang objects over beds.