Close this window
Click the store of your choice to purchase 3M Command - Designer Medium Hooks:

Command - Designer Medium Hooks



2.00 ct
SKU / UPC: 051131769083


To Mount Hooks: 1. Clean Surface - Use isopropyl rubbing alcohol, wipe lightly, let dry. Do not use household cleaners; 2. Apply Strip - Remove red Command Adhesive liner. Align square end with raised line on back of hook . Press firmly; 3. Press Firmly - Remove black wall slide liner. Position hook and press entire hook firmly for 30 seconds; 4. Wait 1 hour before use. To Remove Hooks and Base: 1. Slide Hook Cover Up - Reveal mounting base and removal tab; 2. Grab Removal Tab - To prevent base from snapping your fingers, hold base as shown. Do not press base against wall. Never pull the strip out at an angle. Strip could break or damage the surface; 3. Slowly slide the tab straight down against the wall stretching the strip at least 12 inches until mounting base releases from the wall. Note: Apply to surfaces above 50 degrees F (10 degrees C). Adhesive could soften and lose adhesion above 105 degrees F (40 degrees C).

Other Info


3M Construction and Home Improvement Markets Div.

Box 33053 St. Paul, MN 55133-3053